Size Chart

UV DTF Transfer Size Chart: What Size to Print for Mugs, Glasses & More

Mugs, tumblers, glasses, phone cases and signs — the UV DTF decal sizes we work from, in cm and inches, plus how to measure for full wraps and fill a 57 cm gang sheet.

SV By Slava V.● 13 November 2026● 5 min read

UV DTF — Size Chart

Measurement = width × height of the decal

ItemCm (W × H)Inches
Pen / lip balm1.5–3 × 4–60.6–1.2 × 1.6–2.4
Shot glass3–4 × 3–41.2–1.6 × 1.2–1.6
Cap front8–11 × 4–63.1–4.3 × 1.6–2.4
Phone case5–7 × 8–132–2.8 × 3.1–5.1
Pint glass7–8 × 8–102.8–3.1 × 3.1–3.9
Water bottle6–8 × 8–122.4–3.1 × 3.1–4.7
Mug — one side8–9 × 8–93.1–3.5 × 3.1–3.5
Mug — full wrap19–20 × 8–97.5–7.9 × 3.1–3.5
Tumbler decal7–10 × 8–122.8–3.9 × 3.1–4.7
A5 notebook10–13 × 10–183.9–5.1 × 3.9–7.1
Mug
8–9 × 8–9 cm
Pint glass
7–8 × 8–10 cm
Tumbler
7–10 × 8–12 cm
Phone case
5–7 × 8–13 cm

Measure the flat, printable face of your item — curves, tapers and seams eat into it. These are suggested sizes; items differ, so a ruler always wins.

UV DTFUK

UV DTF transfers aren't for t-shirts — they're peel-and-stick decals for hard, smooth surfaces: glass, mugs, tumblers, bottles, phone cases, acrylic, metal and sealed wood. There's no heat press involved, so the only thing you need to get right is the size. Too big and it wraps over a curve or a handle; too small and it gets lost on the item.

Below is the size chart we work from for UV DTF, with width × height for every common item, how to measure for full wraps, and how to fit as many decals as possible onto a single gang sheet.

UV DTF is for hard surfaces only — not garments or fabric. For clothing, use our DTF transfer size chart instead.

How to read this chart

Unlike a garment print, a UV DTF decal sits on an object with a fixed shape — a curved mug, a narrow pen, a flat phone case. So we size it by width × height, not just the longest side.

  • Width runs around the item (across a flat face, or around the curve of a mug or bottle).
  • Height runs top to bottom — keep it inside the flat, usable band, clear of rims, bases and tapers.
  • Sizes are starting points. Every mug, glass and case is a little different, so confirm with a ruler on the actual item.

Before you order

Measure the flat, usable area of the item — not the whole object. On tapered tumblers and glasses, measure the straight section only; a decal laid across a taper will wrinkle or lift.

Full UV DTF size chart

All sizes are width × height of the finished decal. Inches are rounded to one decimal place.

UV DTF transfer sizes — width × height
Item Cm (W × H) Inches (W × H)
Pen, lip balm, lighter 1.5–3 × 4–6 0.6–1.2 × 1.6–2.4
Shot glass 3–4 × 3–4 1.2–1.6 × 1.2–1.6
Cap / hat front panel 8–11 × 4–6 3.1–4.3 × 1.6–2.4
Phone case 5–7 × 8–13 2–2.8 × 3.1–5.1
Pint / beer glass 7–8 × 8–10 2.8–3.1 × 3.1–3.9
Water bottle 6–8 × 8–12 2.4–3.1 × 3.1–4.7
Mug (330 ml) — one side 8–9 × 8–9 3.1–3.5 × 3.1–3.5
Mug (330 ml) — full wrap 19–20 × 8–9 7.5–7.9 × 3.1–3.5
Tumbler (600 ml–1.2 L) — decal 7–10 × 8–12 2.8–3.9 × 3.1–4.7
Tumbler (600 ml) — full wrap 21–23 × 15–18 8.3–9.1 × 5.9–7.1
Notebook / A5 cover 10–13 × 10–18 3.9–5.1 × 3.9–7.1
Acrylic sign, wood board, metal tin 8–20 × 8–20 3.1–7.9 × 3.1–7.9

Suggested starting points — items differ, so measure when in doubt.

Full wraps: mugs & tumblers

A wrap runs right around the item, so its width comes from the item itself rather than the chart:

  1. Measure the circumference of the straight section with a tape or a strip of paper.
  2. Subtract the handle on a mug — the wrap runs from one side of the handle to the other, not underneath it.
  3. Leave a small gap where the two ends meet so they don't overlap and lift.
  4. Set the height to the flat band between the rim and the base, keeping clear of any lip or curve.

Pro tip: paper template first

Cut your decal size out of paper and tape it to the item. It takes thirty seconds and shows you instantly whether it clears the handle, the rim and the curve.

How to use it

From file to finished decal in five steps:

  1. Pick the item you're decorating — a 330 ml mug, a pint glass, a phone case.
  2. Read its row on the chart and note the width × height.
  3. Measure the item to confirm the flat, usable area.
  4. Set your artwork to that size and nest it onto a UV DTF gang sheet.
  5. Apply: clean the surface, peel the backing, lay the decal down, rub it firmly from the centre outwards, then slowly peel away the top film.

Sizing for UV DTF gang sheets

UV DTF is printed on a 57 cm wide roll, so you can fill one sheet with as many decals as fit — mix pens, mugs, glasses and signs at once and pay for the film, not per design.

  • Small sheets: 57 × 30 cm (£15) and 57 × 50 cm (£18) — ideal for a test run or a handful of decals.
  • Metre sheets: 1 to 10 metres long, from £23 per metre, dropping to £22.50 (2 m+), £21 (5 m+), £20 (7 m+) and £18 per metre at 10 m+. Bulk prices apply automatically at checkout.
  • Leave a 20 mm gap between designs — that's our recommended minimum for UV DTF, so each decal can be cut and peeled cleanly. Our online builder sets this for you.
  • Maximum size: a single decal can be up to 57 cm wide.

As a rough guide, one-side mug decals at 9 × 9 cm with 20 mm gaps fit five across the roll — around 40–45 per metre.

UV DTF gang sheet online builder
— Build it online

Create a UV DTF gang sheet

Drop in your designs, size them with this chart and let the builder space them at 20 mm. Mix as many items as you like on one sheet.

£15.00From / sheet
Open builder
Upload a UV DTF gang sheet
— Already laid out?

Upload a UV DTF gang sheet

Got a print-ready 57 cm wide file? Upload it as it is and we'll print it. Priced per metre with automatic bulk savings.

£23.00From / metre
Upload

What UV DTF works on

UV DTF bonds to hard, smooth, clean surfaces: glass, ceramic, metal, plastic, acrylic and sealed wood. It isn't designed for fabric, garments or soft, flexible materials — for clothing, choose standard DTF transfers sized with our garment size chart.

Browse the full range in our UV DTF transfers collection.

Earn £15 = a free gang-sheet metre

P.S. — Sharing your prints pays

Every follow, review or post earns DTF Credit.

Tag us in a finished piece, leave an honest review, or follow along and your account stacks up DTF Credit. Hit £15 of credit and that's a free gang-sheet metre — a whole metre of film to fill with as many decals as you can nest.

Follow · +credit Review · +credit Post & tag · +credit £15 = 1 free metre
Start earning DTF Credit
SV
Slava V.
DTF.UK · Milton Keynes