DTF Pressing & Care Instructions
General Notes:
- Actual press settings may vary depending on your equipment and environmental factors such as room temperature and humidity.
- Use firm pressure: 45–55 PSI on T-shirts, 65 PSI on hoodies. No gauge on your press? Use firm pressure.
- One set of settings works for both hot-peel and cold-peel film.
Hot Peel Instructions
- 100% Cotton: Press at 160°C (320°F) for 10 seconds.
- Polyester: Press at 120°C (248°F) for 5 seconds. Too hot can scorch, so test first.
- Peel: Pneumatic or manual clamp press at the right pressure: peel hot. Low-pressure home presses: let it cool, then peel.
Cold Peel Instructions
- 100% Cotton: Press at 160°C (320°F) for 10 seconds.
- Polyester: Press at 120°C (248°F) for 5 seconds. Too hot can scorch, so test first.
- Peel: Pneumatic or manual clamp press at the right pressure: peel hot. Low-pressure home presses: let it cool, then peel.
DTF Care Instructions
Storage
- Store transfers in a dry place, ideally in a Ziploc bag, to protect from moisture.
Garment Care
- Wash garments inside out at 30°C with a mild detergent.
- Do not iron directly on the design. If ironing is necessary, use a low setting and iron the garment inside out.
Pressed and washed this way, prints last 60+ washes.





















